UPS-BAT/PB/24DC/1.2AH PHOENIX

The Phoenix Power Board serves as a central distribution hub for power management across industrial control modules, input and output terminals, and peripheral devices. It is engineered to accept primary power inputs from standard industrial power supplies and route filtered, regulated power to multiple downstream channels or backplane buses. Built with high-grade components and conformal coatings, the board minimizes voltage drop across long lines, reduces electromagnetic interference, and simplifies wiring complexity by replacing individual wire-jumper assemblies with dedicated power traces. Integrated protection elements safeguard downstream electronics against overcurrent, overvoltage, and reversed polarity conditions.

Product Parameters

• Input Voltage Options: Supports standard industrial DC inputs (typically 24 V DC) and select AC input variations depending on the specific model layout.

• Output Voltage Channels: Multiple regulated outputs providing power to controller bases, field devices, and sensor networks.

• Maximum Current Rating: Total current capacity designed to support heavy load distribution, with individual channel current limits.

• Protective Features: Built-in fuse protection, transient voltage surge suppression, and short-circuit protection on each distribution path.

• Mounting Type: Designed for standard DIN rail mounting or direct backplane screw mounting within standard enclosure systems.

• Connection Technology: Push-in or screw-terminal connection blocks designed for high vibration resistance and quick installation.

• Operating Temperature: Operates within a standard industrial temperature range from -25°C to 70°C (-13°F to 158°F).

• Storage Temperature: Rated for storage from -40°C to 85°C (-40°F to 185°F).

• Relative Humidity: Up to 95% non-condensing operating humidity.

• Status Diagnostics: Integrated LED status indicators for input power presence, active channel output, and blown fuse alerts.

Product Advantages

A major advantage of the Phoenix Power Board is the drastic reduction in control cabinet wiring time and complexity, replacing tangled terminal jumpers with a clean, pre-tested circuit distribution layout.

Its robust electrical design provides enhanced system reliability by isolating individual power channels, preventing a single short circuit from shutting down the entire control cabinet.

The board incorporates high-efficiency power handling with low thermal dissipation, maintaining low cabinet temperatures and extending the lifespan of adjacent electronic components.

Additionally, user-friendly connection technology and visual diagnostic LEDs streamline installation, commissioning, and routine maintenance troubleshooting.

Important Considerations and Precautions

When installing and operating the Phoenix Power Board, ensure that the total combined current draw across all output channels does not exceed the maximum rated backplane input current.

Always turn off main primary power prior to inserting, removing, or wiring connections to prevent arc flashes or damage to sensitive electronic components.

Proper wire gauge selection according to national electrical codes is necessary for input and output connections to handle maximum continuous current loads safely.

Ensure adequate ventilation around the power board inside the enclosure to prevent heat buildup during continuous full-load operations.

Verify that all protective grounding and earthing connections are firmly established to maintain surge suppression effectiveness and user safety.

Product Applications

The Phoenix Power Board is deployed across a wide range of industrial automation and power management environments.

• Industrial Control Cabinets: Providing central 24 V DC power distribution for programmable logic controllers, I/O modules, and field relays.

• Process Automation Systems: Powering critical field transmitters, signal conditioners, and valve positioners in chemical and energy plants.

• Machine Building: Distributing control and drive power across modular sub-assemblies in automated packaging and assembly machinery.

• Building Automation: Interfacing central power units with distributed HVAC controllers, lighting modules, and access control hardware.

• Renewable Energy Installations: Managing auxiliary control power within wind turbine nacelles and solar inverter control boxes.