QUINT-PS-100-240VAC/24VDC/20 PHOENIX

Phoenix QUINT-PS-100-240VAC/24VDC/20 Servo Controller

Brand： PHOENIX Model number：QUINT-PS-100-240VAC/24VDC/20

Country of origin:Germany Product weight：0.55kg

HS code：8517623990

Product Details：

Product Dimensions：

The controller houses digital signal processing hardware paired with solid-state power modules, designed to interface seamlessly with AC synchronous and brushless DC servo motors. It interprets fieldbus communications, pulse/direction commands, or analog setpoints to adjust power output via pulse-width modulation (PWM). The unit supports closed-loop control by continuously monitoring feedback signals from encoders, resolvers, or Hall sensors. Compact panel-mount or DIN-rail housing structures facilitate installation inside standard industrial control enclosures. Integrated diagnostic displays and software interface connections allow engineers to configure loop parameters, calibrate motor feedback, and monitor real-time drive telemetry.

Product Parameters

Input Operating Voltage: 24 VDC control power, with main power supply options ranging from single-phase 110/230 VAC up to three-phase 400/480 VAC.
Continuous Output Current: Configurable drive models supporting ratings from 2 A up to 32 A continuous current.
Peak Output Current: Capable of delivering up to 200% to 300% of continuous current for rapid acceleration phases.
Supported Motor Types: AC servo motors, brushless DC (BLDC) motors, direct-drive linear motors, and closed-loop stepper systems.
Feedback Interfaces: Incremental encoders (A/B/Z channels), absolute encoders (EnDat, SSI, BiSS), and resolver inputs.
Communication Protocols: Integrated support for EtherCAT, PROFINET, CANopen, Ethernet/IP, and RS-485 serial communication.
Control Modes: Position control, speed/velocity control, torque control, and synchronized electronic gearing or camming.
Operating Temperature Range: 0°C to 50°C (32°F to 122°F) ambient operating conditions.
Safety Integration: Integrated Safe Torque Off (STO) function compliant with SIL 3 / PL e safety standards.

Product Advantages

High dynamic response rates allow the drive to perform extremely fast acceleration and deceleration ramps without losing positioning accuracy.

Integrated multi-protocol communication capabilities ensure easy integration into existing PLC topologies, reducing the complexity of system network architecture.

Advanced current loop algorithms suppress mechanical resonance and minimize vibration, extending the operational lifespan of physical couplings and gearboxes.

Embedded functional safety features like Safe Torque Off eliminate the need for redundant external contactors, saving space on the mounting panel.

Comprehensive commissioning software provides intuitive tuning tools, automated motor identification, and real-time oscilloscopes for fast system setup.

Important Considerations and Precautions

Always verify that motor feedback cabling is constructed using double-shielded twisted pairs and physically separated from high-voltage motor power leads to prevent signal noise disruption.

Ensure proper thermal management and clearance around the drive heatsink to avoid internal over-temperature tripping under heavy continuous loads.

Proper grounding of the drive chassis, motor frame, and shield connections to a central earth ground bus is essential to minimize electromagnetic interference (EMI).

Confirm that the power supply's brake chopper circuit or external regenerative resistor is correctly sized when operating high-inertia loads with rapid deceleration profiles.

Never connect or disconnect power cables, motor leads, or feedback connectors while electrical power is actively applied to the unit to prevent pin arcing and component damage.

Product Applications

Packaging and Labeling Machinery: Regulating high-speed material feeding, rotary knives, and flying shears where precise angular alignment is required.
Robotics and Automated Assembly: Driving multi-axis robotic arms, pick-and-place gantry systems, and automated sorting mechanisms.
CNC and Material Working: Controlling feed axes and spindle positioners in light CNC milling, laser cutting, and engraving machinery.
Semiconductor and Electronics Manufacturing: Executing micro-positioning tasks on wafer handling equipment, PCB placement systems, and inspection stages.
Conveyor Systems and Material Handling: Managing synchronized multi-conveyor belts, automated guided vehicles (AGVs), and high-bay storage retrieval drives.

QUINT-PS-100-240AC/24DC/20 PHOENIX

We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation！

Phoenix2866763

PhoenixPSM-EG-RS232/TTY-P/2K

Phoenix2320500

PhoenixQUINT-PS-100-240AC/24DC/2.5

Phoenix2868567

Phoenix2864176

PhoenixPSM-ME-RS232

PhoenixMCR-VAC-UI-0-DC

Phoenix7400165-510

PhoenixUK 5-HESI

Phoenix2700718

Phoenix2868596