QMEM-2 51401072-200 HONEYWELL

HONEYWELL QMEM-2 51401072-200 Output Module

Brand：HONEYWELL Model number：QMEM-2 51401072-200

Country of origin: United States Product weight：0.4kg

HS code：8517623990

Product Details：

Product Dimensions：

A Honeywell Output Module is a compact, electronic device that receives commands from a central controller (like a PLC, DCS, or fire alarm panel) and provides an electrical signal to a connected field device. They are essential for a system's ability to actuate equipment based on its programmed logic. Honeywell offers a variety of output modules to suit different applications and signal types.

Functionality: Output modules convert the low-voltage logic signals from a controller into the higher voltage and current required by field devices. This isolation protects the sensitive electronics of the control system from electrical noise and potential faults in the field wiring.
Types:

Digital (Relay/Discrete) Output Modules: These modules use relays or solid-state switches to provide on/off control. They are used for simple two-state devices like lights, alarms, fans, or motors. They are commonly available in various voltage ratings, such as 24V DC, 120V AC, and 230V AC.
Analog Output Modules: These modules convert a digital value from the controller into a continuous analog signal, typically 0-10V DC or 4-20mA. This allows for precise, variable control of devices like proportional valves, variable speed drives, or dimmable lighting.
Specialty Modules: Honeywell also provides specialized modules for specific applications, such as addressable control modules for fire alarm systems that can activate strobes or sounders, or modules with integrated manual override switches for local control.

Product Parameters

Specific parameters vary by the module's series and model, but common specifications include:

Voltage Rating: The maximum voltage the output can switch (e.g., 24V DC, 250V AC).
Current Rating: The maximum current per channel and for the entire module (e.g., 2A per channel).
Number of Channels: The number of individual outputs on a single module (e.g., 8-channel, 16-channel).
Signal Type: The type of signal the module provides (e.g., dry contact relay, 0-10V analog, 4-20mA analog).
Resolution (for Analog): The precision of the output signal conversion (e.g., 13-bit A/D).
Communication Protocol: The protocol used to communicate with the controller (e.g., LonWorks, Panel Bus, specific proprietary protocols for fire systems).
Operating Environment: The acceptable temperature and humidity range (e.g., -20°C to 60°C, 5% to 95% non-condensing humidity).
Certifications: Compliance with relevant safety and performance standards (e.g., UL, CE, EN54).
Mounting Type: How the module is installed (e.g., DIN rail mount, surface mount, plug-in to a bus).

Product Advantages

Reliability: Honeywell modules are built for durability and reliable performance in demanding industrial and commercial environments, minimizing system downtime.
Flexibility: The wide range of output types and channel counts provides the flexibility to meet the specific requirements of any application.
Simplified Installation and Maintenance: Many modules feature pluggable terminals and a modular design, allowing for hot-swapping without rewiring, which simplifies installation and makes maintenance faster and easier.
Advanced Diagnostics: Integrated LEDs and diagnostic features provide a quick visual status of each output channel, aiding in troubleshooting. Some modules can even report fault conditions back to the control panel.
Compact Design: Many of Honeywell's modules are designed to be compact and space-saving, allowing for more I/O points in a smaller panel footprint.
Seamless Integration: Designed to work seamlessly within Honeywell's ecosystem of control systems, sensors, and software, ensuring a cohesive and efficient solution.

Important Considerations

Load Compatibility: Always check that the module's voltage and current ratings are sufficient for the connected field device to prevent damage and ensure safe operation.
Power Supply: Ensure the module has a stable and correct power supply as per the manufacturer's specifications. Some modules require an external power source for the loads they control.
Wiring Practices: Follow proper wiring standards, including correct wire sizing, grounding, and separation of high-voltage and low-voltage circuits.
Addressability: For addressable systems like those used in fire alarms, ensure each module is correctly addressed to communicate with the control panel.
Product Documentation: Refer to the specific product datasheet and installation manual for detailed wiring diagrams, safety instructions, and technical specifications for the model you are using.
Environmental Limits: Install modules in environments that do not exceed their specified temperature, humidity, and vibration limits to ensure long-term reliability.

Product Applications

Honeywell Output Modules are widely used in a variety of industries and applications:

Building Automation Systems (BAS):

Controlling HVAC equipment like dampers, fans, and chillers.
Managing lighting systems for on/off control or dimming.
Operating valves for water or steam flow regulation.

Fire and Life Safety Systems:

Activating alarms, strobes, and sounders.
Controlling emergency functions like smoke dampers and door holders.

Industrial Automation:

Operating relays and motor starters for machinery.
Controlling solenoids on pneumatic or hydraulic systems.
Adjusting speed on variable frequency drives.

Energy Management Systems:

Controlling electrical loads to optimize energy consumption.
Managing load shedding and peak demand reduction.

51301177-100 HONEYWELL

We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation！